Format corrupted Innostor flash controllers that have chip part number Innostor IS916-B1, IS916-C1, IS916-D0, IS916-D1.Download Innostor IS916 MP Tool v2.10.02.49 firmware and fix your flash disk .
Innostor IS916 MP Tool v2.10.02.4
Innostor IS916 MP Tool v2.10.02.49 has been designed to reformat Innostor Flash controllers .Innostor IS916 MP Tool v2.10.02.49 format tool support updating the flash controller firmware of the following Innostor chip vendor : Innostor IS916-B1, IS916-C1, IS916-D0, IS916-D1 .Innostor IS916 MP Tool v2.10.02.49 formatter can fix Innostor flash drives format errors such as raw flash disk ,write protection ,insert disk error message , no media and other format problems .
Innostor IS916 MP Tool v2.10.02.49 can recover the previous chip controllers and it has been recovered Verbatim store n go USB flash drive 16GB with IS916 chip vendor with the following chip genius report :
Device Type: Mass Storage Device
Protocal Version: USB 2.10
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 1F75 PID = 0916
Device Vendor: Innostor Technology Corp.
Device Name: IS916EN
Device Revision: 0001
Manufacturer: Innostor
Product Model: NAND Flash
Product Revision: 1.00
Chip Vendor: Innostor(??)
Chip Part-Number: IS916
Innostor IS916 MP Tool v2.10.02.49 firmware support repairing the previous chip controllers ,
so please don't use it with different controllers .First determine your
USB flash disk chip vendor , you can use Chip genius software or USB Deview V2.30 utility.
How to update Innostor IS916 flash drive firmware ?
- Download Innostor IS916 MP Tool v2.10.02.49.rar from download links below .
- Insert corrupted Innostor IS916 flash disk to your PC .
- Extract Innostor IS916 MP Tool v2.10.02.49.rar and open Innostor IS916 MP Tool v2.10.02.49.exe .
- If your flash controller is supported , you will see flash info appears on the software interface .
- Click Start to update flash controller firmware .
- If you need to change configuration " Config Password : IS0024 " .
If this software doesn't work with your flash drive ,go to the second solution "remove the case of the flash drive and write in a comment the details that exist on the chip controller of flash drive board and i will try to find the best firmware for you .
You can try this solution also , please read the following articles :
Search tags :
Innostor IS916 MP Tool v2.10.02.49
Innostor IS916 MP Tool v2.10.02.49.rar
Innostor IS916 MP Tool v2.10.02.49.exe
Innostor IS916 MP Tool
Innostor IS916 formatter
Innostor IS916 firmware
To download from our download links ,click on download link then wait 5 Sec then Click Skip AD to download software look to this Picture .
Download Innostor IS916 MP Tool v2.10.02.49
Innostor IS916 MP Tool v2.10.02.49 firmware
File Name:InnostorIS916 MP Tool
|
OS : Windows
|
Program version:v2.10.02.49
|
Software Size : 2.60 MB
|
Description:
|
Innostor firmware |
Hi Ashraf
ReplyDeleteI'm Nathanael and i've got a lexar 32GB flash drive that isn't working properly the numbers on the chip are: PF47, AL, 1242, and RRYG. I've run it through ChipGenius and also Innostor IS916 MP Tool and i can send screen shots of the outcome if it helps.
how to flip the removable bit with this tool?
ReplyDeleteHello, i had try this tool and i can find my usb stick, but it fails because config fail. I had also tried with the both external configfiles.
ReplyDeleteBK0: 2C88044BA90000002C8804
BK1: 2C88044BA90000002C8804
Thanks
Спасибо, помогло. KingMax 8Gb.
ReplyDeleteDevice Name: +[G:]+Generic USB Hub(Innostor NAND Flash USB Device)
ReplyDeletePnP Device ID: VID = 8087 PID = 8000
Serial Number: 5&&BD7C12&&0&&1
Revision: 1.00
Device Type: Standard USB device -
Chip Vendor: (No match record)
Chip Part-Number: (No match record)
Product Vendor: Innostor
Product Model: NAND Flash
Tools on Web: (N/A)
Description: [F:]USB Mass Storage Device(Innostor NAND Flash)
ReplyDeleteDevice Type: Mass Storage Device
Protocal Version: USB 3.00
Current Speed: High Speed
Max Current: 496mA
USB Device ID: VID = 1F75 PID = 0916
Device Vendor: Innostor Technology Corp.
Device Name: IS916
Device Revision: 000D
Manufacturer: Innostor
Product Model: NAND Flash
Product Revision: 1.00
Controller Vendor: Innostor
Controller Part-Number: IS916-D0 - ??ROM??
Flash ID code: 68686868 - 1CE/Single Channel [TLC Toggle-DDR] -> Total Capacity = 4GB
Tools on web: http://dl.mydigit.net/special/up/innostor.html
Possible Flash Part-Number
----------------------------
Unknown
Flash ID mapping table
----------------------------
[Channel 0] [Channel 1]
686868686868 --------
090909090909 --------
-------- --------
-------- --------
Drive could not be repaired.
Description: [F:]Dispositivo de almacenamiento USB(Innostor NAND Flash)
ReplyDeleteDevice Type: Mass Storage Device
Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
Current Speed: High Speed
Max Current: 500mA
USB Device ID: VID = 1F75 PID = 0916
Device Vendor: Innostor Technology Corp.
Device Name: IS916
Device Revision: 000D
Manufacturer: Innostor
Product Model: NAND Flash
Product Revision: 1.00
Controller Vendor: Innostor
Controller Part-Number: IS916-D0 - ??ROM??
Flash ID code: 2C88044B - Micron MT29F128G08CFAAA - 2CE/Single Channel [MLC-8K] -> Total Capacity = 16GB
Tools on web: http://dl.mydigit.net/special/up/innostor.html
Possible Flash Part-Number
----------------------------
[1CE]MT29F64G08CBAAA(25nm) x 2 pcs/Channel x 1 Channel
[2CE]MT29F128G08CFAAA(25nm) x 1 pcs/Channel x 1 Channel
Flash ID mapping table
----------------------------
[Channel 0] [Channel 1]
2C88044BA900 --------
2C88044BA900 --------
-------- --------
-------- --------
Controller: Innostor IS917 E1
ReplyDeletePossible Memory Chip(s): Not available
Flash ID: 2CA46432 AA04
Flash CE: 1
Chip F/W: 41.06.01.70
VID: 1F75
PID: 0917
Manufacturer:
Product: USB DISK
Query Vendor ID:
Query Product ID:
Query Product Revision: 1.00
Physical Disk Capacity: 31457280000 Bytes
Windows Disk Capacity: 31440437248 Bytes
Internal Tags: CXZH-QCB4
File System: FAT32
Relative Offset: 64 KB
USB Version: 3.00 in 2.00 port
Declared Power: 200 mA
ContMeas ID: DE29-03-00
Description: [F:]USB Mass Storage Device(Innostor NAND Flash)
ReplyDeleteDevice Type: Mass Storage Device
Protocal Version: USB 3.00
Current Speed: High Speed
Max Current: 504mA
USB Device ID: VID = 1F75 PID = 0916
Device Vendor: Innostor Technology Corp.
Device Name: IS916
Device Revision: 000B
Manufacturer: Innostor
Product Model: NAND Flash
Product Revision: 1.00
Controller Vendor: Innostor
Controller Part-Number: IS916-B0 - ??ROM??
Flash ID code: ECDE98CE - Samsung K9ACGD8U0M - 1CE/Single Channel [TLC-8K Toggle-DDR] -> Total Capacity = 8GB
Tools on web: http://dl.mydigit.net/special/up/innostor.html
Possible Flash Part-Number
----------------------------
[1CE]K9ACGD8U0M(27nm) x 1 pcs/Channel x 1 Channel
Flash ID mapping table
----------------------------
[Channel 0] [Channel 1]
ECDE98CE74C3 --------
Description: [D:]USB Mass Storage Device(Generic NAND Flash)
ReplyDeleteDevice Type: Mass Storage Device
Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 3538 PID = 0901
Serial Number: 000000000000000949
Device Vendor: PQI
Device Name: USB Flash Drive
Device Revision: 1075
Manufacturer: Generic
Product Model: NAND Flash
Product Revision: 1.00
Controller Vendor: Innostor
Controller Part-Number: IS916EN-A2
Tools on web: http://dl.mydigit.net/special/up/innostor.html
please help
link not availabl;e
ReplyDeletedownload link is not working .please fix it.
ReplyDeleteDescription: [E:]USB Mass Storage Device(Innostor NAND Flash)
ReplyDeleteDevice Type: Mass Storage Device
Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
Current Speed: High Speed
Max Current: 500mA
USB Device ID: VID = 1F75 PID = 0916
Device Vendor: Innostor Technology Corp.
Device Name: IS916
Device Revision: 000D
Manufacturer: Innostor
Product Model: NAND Flash
Product Revision: 1.00
Controller Vendor: Innostor
Controller Part-Number: IS916-D0 - ??ROM??
Flash ID code: 2C88044B - Micron MT29F128G08CFAAA - 2CE/Single Channel [MLC-8K] -> Total Capacity = 16GB
Tools on web: http://dl.mydigit.net/special/up/innostor.html
Possible Flash Part-Number
----------------------------
[1CE]MT29F64G08CBAAA(25nm) x 2 pcs/Channel x 1 Channel
[2CE]MT29F128G08CFAAA(25nm) x 1 pcs/Channel x 1 Channel
Flash ID mapping table
----------------------------
[Channel 0] [Channel 1]
2C88044BA900 --------
2C88044BA900 --------
-------- --------
-------- --------
Description: [E:]USB Mass Storage Device(Innostor NAND Flash)
ReplyDeleteDevice Type: Mass Storage Device
Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 1F75 PID = 0916
Device Name: IS916EN
Device Revision: 0001
Manufacturer: Innostor
Product Model: NAND Flash
Product Revision: 1.00
Controller Part-Number: Unknown
Description: [E:]USB Mass Storage Device(Innostor NAND Flash)
ReplyDeleteDevice Type: Mass Storage Device
Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 1F75 PID = 0916
Device Name: IS916EN
Device Revision: 0001
Manufacturer: Innostor
Product Model: NAND Flash
Product Revision: 1.00
Controller Part-Number: Unknown
D27UCG8T2MYR Innostor Flash drive MP tool.
ReplyDeleteinnostor IS916 MP Tool v2.10.02.49 is not working
Description: [H:]USB Mass Storage Device(Innostor NAND Flash)
ReplyDeleteDevice Type: Mass Storage Device
Protocal Version: USB 3.00
Current Speed: High Speed
Max Current: 400mA
USB Device ID: VID = 1F75 PID = 0917
Device Vendor: Innostor Technology Corp.
Device Name: IS917
Device Revision: 0001
Manufacturer: Innostor
Product Model: NAND Flash
Product Revision: 1.00
Controller Vendor: Innostor
Controller Part-Number: IS917-E0 - ??ROM??
Flash ID code: 45DE9493 - SanDisk SDTNRGAMA-008G - 4CE/Single Channel [MLC-16K] -> Total
Capacity = 32GB
Pls Give Me Flash File..I Wana To Repair My Pen Drive
Description: [H:]USB Mass Storage Device(Innostor NAND Flash)
ReplyDeleteDevice Type: Mass Storage Device
Protocal Version: USB 3.00
Current Speed: High Speed
Max Current: 400mA
USB Device ID: VID = 1F75 PID = 0917
Device Vendor: Innostor Technology Corp.
Device Name: IS917
Device Revision: 0001
Manufacturer: Innostor
Product Model: NAND Flash
Product Revision: 1.00
Controller Vendor: Innostor
Controller Part-Number: IS917-E0 - ??ROM??
Flash ID code: 45DE9493 - SanDisk SDTNRGAMA-008G - 4CE/Single Channel [MLC-16K] -> Total
Capacity = 32GB
Pls Give Me A Flash File.. i Wana to repair my flash drive
Description: [F:]USB Mass Storage Device(NAND USB2DISK)
ReplyDeleteDevice Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = FFFF PID = 1201
Device Revision: 0000
Manufacturer: NAND
Product Model: USB2DISK
Product Revision: 0.00
Controller Vendor: FirstChip
Controller Part-Number: FC1178BC
Flash ID code: 453A94937651 - SanDisk - 1CE/Single Channel [MLC] -> Total Capacity = 16GB
Description: [J:]USB Mass Storage Device(Innostor NAND Flash)
ReplyDeleteDevice Type: Mass Storage Device
Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 1F75 PID = 0917
Device Vendor: Innostor Technology Corp.
Device Name: IS917
Device Revision: 0001
Manufacturer: Innostor
Product Model: NAND Flash
Product Revision: 1.00
Controller Vendor: Innostor
Controller Part-Number: IS917-E0 - ??ROM??
Tools on web: http://dl.mydigit.net/special/up/innostor.html
where can i find tool for IS917 ?
ReplyDeletewhere can i find tool IS917-D1? plis
ReplyDelete