Download AlcorMP v14 to repair corrupted Alcor chip controller



Download AlcorMP v14 to repair corrupted Alcor chip controller

Download AlcorMP V14 and repair corrupted Alcor chip controller .If you have corrupted USB drive that have Alcor chip , update it's firmware by using AlcorMP V14 .

AlcorMP v14 format tool


Download AlcorMP v14 to repair corrupted Alcor chip controller

AlcorMp V14 formatter allows to format and repair corrupted USB flash drives that have Alcor Chip vendor .AlcorMP V14 software is a simple firmware that can used to update Alcor chip controller and restore the original flash firmware .You must be sure that your flash drive chip vendor is alcor , you can use Chip genius software to determine your flash drive information .AlcorMP V14 format tool can be used with the flash drives that have alcor controller with the following "VID =  0011       , PID = 7788 " .


Be careful by using AlcorMP V14 recovery tool , all data in the flash drive will be erased while updating flash drive firmware  .To learn how to fix your alcor controller firmware , please follow the next steps .


  • Download AlcorMP V14 firmware from the download links in the end of this article .
  • Insert your corrupted Alcor USB Drive to your computer .
  • Extract the zipped folder and open the file called "AlcorMP.exe " .
  • If your flash drive is supported , you will see your flash drive information appear on the AlcorMP interface .
  • Now Click on Start to begin formatting your corrupted alcor usb drive .
  • Wait until finish updating the flash drive firmware .

If this software doesn't work with your flash drive ,go to the second solution "remove the case of the flash drive and write in a comment the details that exist on the chip controller of flash drive board and i will try to find the best firmware for you .

You can try this solution also , please read the following articles :

 Download AlcorMP v14.01.24 software

Download Link
   Please select one server to download


Server 1 

11 comments:

  1. Help me! My Trancend USB has an error "No support flash error".
    How to fix this error?

    ReplyDelete
  2. give me the model name of transcend and chip genius report plz

    ReplyDelete
    Replies
    1. USB Device ID: VID = 0000 PID = 7777
      Serial Number: DCDC8C36
      2TB TRANSCEND

      Delete
  3. Description: [H:]USB Mass Storage Device(Generic USB Flash Disk)
    Device Type: Mass Storage Device

    Protocal Version: USB 2.00
    Current Speed: High Speed
    Max Current: 100mA

    USB Device ID: VID = 058F PID = 1234

    Device Vendor: Alcor Micro
    Device Name: Mass Storage Device
    Device Revision: 0001

    Manufacturer: Generic
    Product Model: USB Flash Disk
    Product Revision: 7.76

    Controller Vendor: Alcor Micro
    Controller Part-Number: AU6989SN-GT/AU6998SN [EC05] - F/W FF0A
    Flash ID code: 8984643C - Intel PF29F16B08LCMFS - 1CE/Single Channel [MLC-16K] -> Total Capacity = 16GB

    Tools on web: http://dl.mydigit.net/special/up/alcor.html


    Possible Flash Part-Number
    ----------------------------
    [1CE]PF29F16B08LCMF1/2/3/S x 1 pcs/Channel x 1 Channel
    [1CE]PF29F16B08LCMFS x 1 pcs/Channel x 1 Channel


    Flash ID mapping table
    ----------------------------
    [Channel 0] [Channel 1]
    8984643CA90C


    Please help me find the tools and firmware. thank you

    ReplyDelete
  4. Help me. My usb flash not reading Controller Part-Number: Unknown
    Please helm me. Thank you very much.
    Data:
    Description: [H:]USB Mass Storage Device(Generic USB Flash Disk)
    Device Type: Mass Storage Device

    Protocal Version: USB 2.00
    Current Speed: High Speed
    Max Current: 100mA

    USB Device ID: VID = 058F PID = 1234

    Device Vendor: Alcor Micro
    Device Name: Mass Storage Device
    Device Revision: 0001

    Manufacturer: Generic
    Product Model: USB Flash Disk
    Product Revision: 7.76

    Controller Vendor: Alcor Micro
    Controller Part-Number: Unknown [F700] - F/W F742
    Flash ID code: AD3A18A3 - Hynix H27UDG8M2MTR - 1CE/Single Channel [TLC-16K] -> Total Capacity = 16GB

    ReplyDelete
  5. admin!

    Description: [H:]USB Mass Storage Device(Generic USB Flash Disk)
    Device Type: Mass Storage Device

    Protocal Version: USB 2.00
    Current Speed: High Speed
    Max Current: 100mA

    USB Device ID: VID = 058F PID = 1234

    Device Vendor: Alcor Micro
    Device Name: Mass Storage Device
    Device Revision: 0001

    Manufacturer: Generic
    Product Model: USB Flash Disk
    Product Revision: 7.76

    Controller Vendor: Alcor Micro
    Controller Part-Number: AU6989SN-GTC/AU6998SN [F500] - F/W FA01
    Flash ID code: EC3A94C3 - Samsung - 1CE/Single Channel [MLC] -> Total Capacity = 16GB

    ReplyDelete
    Replies
    1. Please help me.my usb
      Controller vendor:alcor micro
      Part-no:AU6989sn-GTC F500 FWFA01
      Samsung
      Capacity 8gb

      Delete
  6. Description: [L:]USB Mass Storage Device(Generic USB Flash Disk)
    Device Type: Mass Storage Device

    Protocal Version: USB 2.00
    Current Speed: High Speed
    Max Current: 100mA

    USB Device ID: VID = 058F PID = 1234

    Device Vendor: Alcor Micro
    Device Name: Mass Storage Device
    Device Revision: 0001

    Manufacturer: Generic
    Product Model: USB Flash Disk
    Product Revision: 7.76

    Controller Vendor: Alcor Micro
    Controller Part-Number: AU6989SN-GTC/AU6998SN [F500] - F/W FA01
    Flash ID code: EC3A94C3 - Samsung - 1CE/Single Channel [MLC] -> Total Capacity = 16GB

    Tools on web: http://dl.mydigit.net/special/up/alcor.html


    Possible Flash Part-Number
    ----------------------------
    Unknown


    Flash ID mapping table

    ReplyDelete